One these eddies are loss to the useful energy that can be extracted from the system and second, as they are in opposite direction, they decrease the energy of the incoming steam stream. bravo, you have reproduced the basic principle of the anti-gravity system
Tesla Turbine and other engines from Jeff Maier. There are several options for CD Disc Packs. I am just starting so have much to learn.
This is where the rocket scientist in you comes out...what size, shape and angle inlet nozzle should the CD Turbine have? Cut two slots about 1 inch long into the case in front of the Nozzle. FREE Shipping by Amazon. © 2019 WonderHowTo, Inc. 5 years ago Make a Tesla turbine blade out of CDs.
The nozzle size going in to the turbine is important, and the more friction-free the discs are, the faster it will go.
Build a real working turbine from recycled CD's! Instead, some of the air or water pushes the outer edge of a disk, and the as the rest is pulled between the disks, flow is converted into tighter spirals which generate centrifugal force.As the disks spin, the spirals become tighter, which increases rate of speed. on
For example, the turbine on the As time went on, competing Axial turbines became dramatically more efficient and powerful, a second stage of reduction gears was introduced in most cutting edge U.S. naval ships of the 1930s. The disks need to be as thin as possible at the edges in order not to introduce turbulence as the fluid leaves the disks. Drill holes in the CD Spindle as shown. Deep Cycle sealed Lead Acid Batts.
Edgrrr… A Delco alternator, with a l;arge fan blade is better…welding current, as opposed to, trickle current….Good question. She is currently working on combining vertical container gardening with hydroponics. Umlaufende Tesla CD Turbine mit Luft Turbo-Boost Wenn das Video, nicht spielen hier klicken statt Diese instructable wird zeigen , wie ein Off-the-Grid zu machen, Tesl. Industrial Tesla turbines may be used in hybrid cars or in commercial applications. But as we'll see in the next section, the theoretical efficiency of the Tesla turbine has not been so easily realized in production models. The Nozzle should be well supported by the build-up of glue on the Case by now. Tesla's pumps and motors were unique in that they only used discs, and took advantage of the boundary layer … In the meantime, you can still do steps 4 – 10.Next, draw a round space in the center where the exhaust will go through.It is best to place the exhaust port near the spindle area, since it is closest to where water or air will exit from between the disks.You should have three parts: the upper lid where the front jacket goes, the lower lid where back jacket goes, and the third – the central portion that holds the spindle that keeps the CD in place.Then use the Dremel to cut and drill out the exhaust port.Take a bottle cap that has a thread size suitable for air or water attachments of interest to you.Cut the cap in such a way that the opening is the same size as the inflow port.Glue the bottle cap to the lower section of the CD case in such a way that the hole in the case matches up with the one on the bottle cap. The CD version of the Tesla Turbine can be used in endless ways. Kindly tell me what things do i have to apply and install more to get enough electrical energy from this turbine to light up a bulb ? In TT, considering that there are no blades to be impacted what is the mechanism of this energy of reaction to materialize. This includes the Tesla Turbine, which does not require a centralized shaft and can run as easily on air as it does water.While Tesla’s original turbines were built using metal disks and heavier machinery, working units can also be built from smaller parts like CDs and magnets.Windmills, steam turbines, and many other devices rely directly or indirectly on air, water, or something else striking a blade mounted to a central shaft.As the blade moves, the mechanical force is converted to electricity via magnets and coils, or it can also be used to propel wheels.The Tesla Turbine is different in the sense that air and water do not strike a blade. Here we have to note that fluids start to behave like solid bodies at high relative velocities, and in TT case, we also have to take in consideration the additional pressure. For example, we can take a 10 cm (3.9 in) radius where at 9000 RPM the peripheral disk speeds are 90 m/s (300 ft/s), when there is no load on the rotor, the disks move at approximately the same speed with the fluid, but when the rotor is loaded, the relative velocity differential (between the SCS and the metal disks) increases and 45 m/s (150 ft/s) rotor speed has a relative speed of 45 m/s to the SCS. 5 years ago According to the old literature on steam boilers it is said, that steam at high speed, resulting from high pressure source, cuts steel as a "knife cuts butter".This dynamics appears to be a derivative of what Tesla commented, and although it is not mentioned by him, it is a logical next step to explain the thermodynamics in the system.
There should be no glue on the inside of the Case. It’s up to you to imagine a use for this turbine.Learning how to build a working model can help you save on your current energy bills and also help you survive crisis.Carmela Tyrrell is committed to off gridding for survival and every day life.